dirtbag
06-23-2011, 12:25 AM
Solved: Apparently the ECS manual for the pins was incorrect or I read it wrong, I had the BW Connector in the wrong spot, it should be on 6&8
Problem:Okay well I have a A780GM-A Mobo and I reffered to the manual and hooked up the Power, LED, and RESET SW as instructed in the manual, anyways when I press the chrome button for the Power on the computer remains off, I did the trick and shorted the MOBO pings with a screwdriver and it turned on so I know its not the set up there, when I connect the power LED to the right pins the front blue light comes on but the computer won't turn on, I have it hooked up like this.
2 4 6 8 (10)
R W G W
O W B W
1 3 5 7 9
With the Letters signifying colors of course, here's the guide for the
MOBO Pins:http://www.ecs.com.tw/ECSWebSite/Support/Support_FAQ_Detail.aspx?MenuID=49&LanID=0&FAQID=2006031854
So I'm at a loss any ideas of what I can do?
Problem:Okay well I have a A780GM-A Mobo and I reffered to the manual and hooked up the Power, LED, and RESET SW as instructed in the manual, anyways when I press the chrome button for the Power on the computer remains off, I did the trick and shorted the MOBO pings with a screwdriver and it turned on so I know its not the set up there, when I connect the power LED to the right pins the front blue light comes on but the computer won't turn on, I have it hooked up like this.
2 4 6 8 (10)
R W G W
O W B W
1 3 5 7 9
With the Letters signifying colors of course, here's the guide for the
MOBO Pins:http://www.ecs.com.tw/ECSWebSite/Support/Support_FAQ_Detail.aspx?MenuID=49&LanID=0&FAQID=2006031854
So I'm at a loss any ideas of what I can do?