I am new, a problem in elite

[AS200]

Hello, I appear, am called Adolfo, am using a translator because not to speak itself very well English...
I have a problem with nemesis black elite, the case is that the lcd of above(up) him(her) goes away the memory(report), that is to say, as if there had been ended the battery(sink) of his(her,your) bios, since I can change it?? :confused:
Thank you one s2

[Earthmonger]

Check the +/- wires that go into your motherboard. Make sure they are in the right position.

----------------------------

Compruebe el + / - los cables que van en la placa base. Aseg?rese de que est?n en la posici?n adecuada.

----------------------------

Controllare il + / - fili che vanno nella tua scheda madre. Assicurarsi che sono nella giusta posizione.

----------------------------

?berpr?fen Sie die + / - Leitungen, die in Ihrem Motherboard. Stellen Sie sicher, dass sie sich in die richtige Position.

----------------------------

Verifique a + / - fios que v?o para a placa-m?e. Certifique-se de que est?o na posi??o correcta.

[AS200]

Check the +/- wires that go into your motherboard. Make sure they are in the right position.

----------------------------

Compruebe el + / - los cables que van en la placa base. Aseg?rese de que est?n en la posici?n adecuada.

----------------------------

Controllare il + / - fili che vanno nella tua scheda madre. Assicurarsi che sono nella giusta posizione.

----------------------------

?berpr?fen Sie die + / - Leitungen, die in Ihrem Motherboard. Stellen Sie sicher, dass sie sich in die richtige Position.

----------------------------

Verifique a + / - fios que v?o para a placa-m?e. Certifique-se de que est?o na posi??o correcta.





Well, thank you, I have forgotten to put my language! That it(he,she) confuses! I am a Spanish jaja
Now it(he,she) will look at the cables thank you very much!

One s2

[AS200]

Good, to my they look like all the cables are put well, I have disconnected and returned to connect them, but my problem persists on having extinguished the computer the lcd him(her) goes away the memory(report) and the date, it(he,she) prays, the maximum temp ... it(he,she) puts on all that as the first day:S

[Earthmonger]

"Con el fin de mantener el reloj de trabajo cuando est? apagado, una bater?a de bot?n est? instalada en la parte posterior de la PCB."

Esta bater?a tambi?n es responsable de guardar los ajustes. De lo que usted ha descrito, suena como la bater?a de verdad est? muerto.

Lea esto. (http://translate.google.com/translate?js=n&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fwww.nzxt.com%2Fforum%2Fshowthread.p hp%3Ft%3D2355&sl=en&tl=es&history_state0=en%7Ces%7CCheck%2520the%2520%252B%2 52F-%2520wires%2520that%2520go%2520into%2520your%2520m otherboard.%2520Make%2520sure%2520they%2520are%252 0in%2520the%2520right%2520position.)

[AS200]

"Con el fin de mantener el reloj de trabajo cuando est? apagado, una bater?a de bot?n est? instalada en la parte posterior de la PCB."

Esta bater?a tambi?n es responsable de guardar los ajustes. De lo que usted ha descrito, suena como la bater?a de verdad est? muerto.

Lea esto. (http://translate.google.com/translate?js=n&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fwww.nzxt.com%2Fforum%2Fshowthread.p hp%3Ft%3D2355&sl=en&tl=es&history_state0=en%7Ces%7CCheck%2520the%2520%252B%2 52F-%2520wires%2520that%2520go%2520into%2520your%2520m otherboard.%2520Make%2520sure%2520they%2520are%252 0in%2520the%2520right%2520position.)


Wow!!! Thank you very much, just now plough it, the truth was going mas of 1 year with this problem and already it(he,she) was satiating me, thank you, enserio,
Now, another question, is it possible that the ventilators have increased his(her,your) noise? Since I can regulate them!? Thank you and one s2:D

[Earthmonger]

Los ventiladores pueden se han convertido en m?s fuerte. Pero, mientras la Elite del panel LCD es de trabajo (con bater?a nueva), debe ser capaz de ajustar la velocidad del ventilador hacia abajo, para que sean m?s silenciosos, si lo desea.

La Nemesis Elite es ciertamente agradable. Espero que hacerlo funcionar como se supone que debe.

[AS200]

Los ventiladores pueden se han convertido en m?s fuerte. Pero, mientras la Elite del panel LCD es de trabajo (con bater?a nueva), debe ser capaz de ajustar la velocidad del ventilador hacia abajo, para que sean m?s silenciosos, si lo desea.

La Nemesis Elite es ciertamente agradable. Espero que hacerlo funcionar como se supone que debe.


Wow! It it wise but if that is true that I cannot lower by any means, the first button changes me between(among) the temp, or if I support touched the date and such, the second one does not change a linternita either arrives at the izkierda that I suppose that sera the alarm, me the truth has never sounded, and the third one me altena between(among) celsius and farenhait ... since I change it?
Once again, thank you, me these being of great help!

[AS200]

There is some way of updating the lcd to have mas control??
Thank you and one s2

[Earthmonger]

Esto no puedo ayudar. Instrucciones de la pantalla s?lo est?n disponibles en Ingl?s. (Aqu?. (http://www.nzxt.com/Download/LCD_English.pdf))

Lo que dice, es que la pantalla LCD se ajusta autom?ticamente la unidad de velocidad del ventilador, pero s? que, seg?n el nivel de temperatura que en el conjunto de la unidad. As? que si elevar el nivel de temperatura, el ventilador se ralentiza autom?ticamente porque no tienen que trabajar tan duro. Si usted baja la temperatura, el ventilador acelera autom?ticamente para responder a ese nivel.

---------------------------------------

(Lo digo ahora en Ingl?s, de modo que si alguien conoce una soluci?n, que pueden entender lo que estoy diciendo.)

---------------------------------------

This I cannot help with. The LCD instructions are only available in English. (Here. (http://www.nzxt.com/Download/LCD_English.pdf))

What it says, is that the LCD unit automatically adjusts the ventilator speed, but it does that according to the temperature level you set the unit at. So if you raise the temperature level, the ventilator slows down automatically because it does not have to work as hard. If you lower the temperature level, the ventilator speeds up automatically to meet that level.

[AS200]

Esto no puedo ayudar. Instrucciones de la pantalla s?lo est?n disponibles en Ingl?s. (Aqu?. (http://www.nzxt.com/Download/LCD_English.pdf))

Lo que dice, es que la pantalla LCD se ajusta autom?ticamente la unidad de velocidad del ventilador, pero s? que, seg?n el nivel de temperatura que en el conjunto de la unidad. As? que si elevar el nivel de temperatura, el ventilador se ralentiza autom?ticamente porque no tienen que trabajar tan duro. Si usted baja la temperatura, el ventilador acelera autom?ticamente para responder a ese nivel.

---------------------------------------

(Lo digo ahora en Ingl?s, de modo que si alguien conoce una soluci?n, que pueden entender lo que estoy diciendo.)

---------------------------------------

This I cannot help with. The LCD instructions are only available in English. (Here. (http://www.nzxt.com/Download/LCD_English.pdf))

What it says, is that the LCD unit automatically adjusts the ventilator speed, but it does that according to the temperature level you set the unit at. So if you raise the temperature level, the ventilator slows down automatically because it does not have to work as hard. If you lower the temperature level, the ventilator speeds up automatically to meet that level.

Pff, it seems that my defective kaja salio of house or esque I do not catch on, when I lower the temperature of notice in the alone lcd blinks but the ventilator does not even turn pale .... it(he,she) is to say, goes =
To seeing if someone who knows mas of the topic us done a cable!
Wnoo thank you and one s2

[AS200]

Pff, it seems that my defective kaja salio of house or esque I do not catch on, when I lower the temperature of notice in the alone lcd blinks but the ventilator does not even turn pale .... it(he,she) is to say, goes =
To seeing if someone who knows mas of the topic us done a cable!
Wnoo thank you and one s2

pd: why I have ! Ignited always??