CD Drive doesn't fit in my Lexa Case :(

[Guitarbloke]

Has anyone else had this problem? The drive sticks out by about an inch (at least) at the front :( I have managed to push it in far enough to get the door closed but the drive just wont sit flush to the front of the case.

If anyone can help I'd be really grateful, other than this litle problem, it's an awesome case!

Thanks

Sean

[Guitarbloke]

nobody? :(

[Guitarbloke]

C'mon guys surely someone can help me?

I pushed the drive in from the front of the case (once I'd removed the front panel of course) with the rails attached but the rails are prevented from sliding back any further by 2 metal 'catches' on either side ni the inside of eth bay. I got past this by levering the ends of the rails over the 'catches' using a flathead screwdriver by succeeded in cutting my hands to pieces in the process.

I had to do the same with my Audigy Platinum front panel
There must be a way of fitting a drive so that it fits properly surely?

I also cannot get the front LED on the case to come on, the long blue one in the centre/front of the case, any ideas?

[NZXT_Dood]

Hello,
Try using the 3rd or 4th Drive bays to see if the CD rom will fit behind the door. ( same with the audigy ). If that failes, take off the screws on the rail and move it to the different position, this will allow you to mount the devices furthur back.

As for the Front LED, connect the pin labeled PLED to your motherboard, the white line being your ground. Thank you, plesae let us know if you have any questions.

[ZorK]

I had the same problem using rails.In the end i forgot about rails and used two screws.