PDA

View Full Version : back panel


brandonj18
02-13-2006, 06:28 PM
I bought an Asus P5WD2-E motherboard and the Back panel connectors on the motherboard don't match up with the back panel on the case. What should I do about that? Like there are two lan ports on the motherboard and the case has only one to put in and also there are only two usb in the back and there are four on the board. What should I do? :confused:
Retell
02-13-2006, 06:58 PM
Your motherboard should come with another metal piece that replaces the one in there. You should just be able to push it in from the back and have it pop out. :)
brandonj18
02-13-2006, 08:03 PM
cool thanks...first time building a computer :D ...i'm excited!
Retell
02-13-2006, 08:04 PM
Good Luck :)
RedRoseWolF
02-13-2006, 09:57 PM
make sure you don't screw the mobo directly to the case....REMEMBER TO USE THE BRASS STANDOFFS!!
neon
02-13-2006, 10:12 PM
yea i couldnt figure that out my first time...was hell trying to keep the mobo in place n all..such n00bish till a noticed the other case i had used standoffs